Crack Filling Applicators

3 products

3 products

Quick view
RY10MS Mastic Applicator (V1)
$2,399.00
Quick view
RY10MA-PRO Crack Fill Melter Applicator (V4)
$1,799.00
Quick view
RY10MA-V3 Crack Fill Melter Applicator
$1,199.00

RY10MS Mastic Applicator (V1)

$2,399.00 Save $-2,399.00
/

The RY10MS was designed to load, dispense and maintain  hot material directly from skid mounted or trailer mastic kettles.

A slanted, ultra-low-profile design allows you to confidently load mastic material from either the front or right side of the kettle.

Material flow is carefully controlled through a large, rectangular gate valve which places hot material near the centre of an easy-to-swap ultra-heavy duty 8″ square steel shoe.

  • 10 Gallon Direct-Fired Mastic Applicator with Standard Torch

SAFETY BUILT IN

  • Handle mounted controls keep the further from the got kettle during operation.
  • A slanted kettle promotes loading from the front of the machine, promoting safer loading and assisting material flow.

EASY TO OPERATE

  • The on-the-fly valve control paired with the easy-swappable steel shoe enables effortless dispensing and optional spreading of material.
  • Handlebar mounted shoe control allows you to lower the shoe during application or keep it raised during transportation.

RELIABLE

  • Large solid-steel wheels equipped with ball-bearings along with dual heavy-duty front castors make maneuvering and fillingseams, cracks, or potholes a breeze.
  • A rigid 14 gauge powder coated kettle easily keeps material at the application temperature, regardless of climate.

PRODUCTIVE

  • Load, transport and apply thousands of pounds of mastic material per day into all types of cracks, seams, joints, or potholes.
  • Maintain and clean gate valve and chute with an included, handlebar mounted clean-out tool.
Fluid Capacity 10 US Gallons
Kettle Steel Thickness 14 Gauge
Kettle Loading Height 17.5″
Empty Weight 139 lbs / 63.2 kg
Max Capacity Weight 237 lbs / 107.7 kg
Fuel Type Propane
Max Fuel Pressure 30 psi
Burner Type 150,000 BTU/hr Heating Torch
Valve Type 5-1/2″ x 2-1/2″ Gate Valve
Agitation Type Manual

RY10MA-PRO Crack Fill Melter Applicator (V4)

$1,799.00 Save $-1,799.00
/

The RY10MA-PRO Professional Crack Fill Melter Applicator’s patent-pending design uses up to 50% less fuel than traditional melter applicators – and it’s got built in time-saving innovations, too.

  • 10 Gallon Direct-Fired Melter
  • Applicator with Single-Burner

 

PRODUCTIVE

  • Melts crack sealant up to 50% faster than torch-fired models and allows you to apply up-to 4,800 feet of crack filler per day.
  • The patented sealed burner consumes nearly 50% less fuel than traditional torch-fired melter applicators.

RELIABLE

  • The enclosed burner design is shielded from the elements and virtually eliminates flameouts caused by wind, which are common to torch-fired models.
  • High-quality glycerine-filled thermometer provides precise temperature readings and is resistant to premature failure caused by constant vibration while in use.
  • Two solid front casters allow the operator to maneuver over slanted surfaces with increased stability.

EASY TO OPERATE

  • No more wasting time searching for a striker, lighter, or matches. Starting a melter has never been easier with our push button electric ignition.
  • Side-by-side controls, including standard on-the-fly agitation allow the operator to control agitation, flow, and application of material as well as view and adjust temperature, all without leaving the operating position.
  • The built-in drip stop allows you to move between cracks without making a mess.

SAFETY BUILT IN

  • Fully equipped with CSA/UL approved regulator and fuel lines provide precise control over fuel flow and kettle temperature.
  • The sealed burner is equipped with a CSA/UL approved flameout sensor which detects flameouts and prevent fuel from flowing to the burner.
  • Heat shields protect the fuel lines and cylinder from the radiant heat of the kettle.
  • 159lbs/72kgs Assembled
  • Height Adjustable Controls
  • Powder Coated Steel Frame
  • Double Front Casters
  • On-The-Fly Agitation
  • 50,000 BTU Sealed Burner
  • 12.5 Gallons
  • 5PSI Max Fuel Pressure
  • Up to 4,800 Feet Per Day
<iframe width="560" height="315" src="https://www.youtube.com/embed/6rbjpaR7svg" frameborder="0" allow="accelerometer; autoplay; encrypted-media; gyroscope; picture-in-picture" allowfullscreen></iframe>

RY10MA-V3 Crack Fill Melter Applicator

$1,199.00 Save $-1,199.00
/

Best-In-Class Entry Level 10-Gallon Crack Fill Melter Applicator

The RY10 Crack Fill Melter Applicator was designed to provide the most efficient, safe, reliable and easy-to-use hot rubberized crack fill machine. Contractors can melt and apply up to 400 feet per hour; 3200 feet per day.

PRODUCTIVE

  • Melt and apply up to 400 feet of crack sealant per hour.
  • Melt and apply up to 3,200 feet of crack sealant per day. 
  • RynoValve™ requires virtually no preheating time and is ready to use as soon as you have hot sealant in the kettle, saving you time between jobs.
RELIABLE
  • The unique liquid filled thermometer is highly resistant to damage caused by constant vibrations during regular use, which ensures a reliable temperature reading every time.
  • Rear wheels feature double ball bearings for increased stability and smooth operation.

EASY TO OPERATE

  • Valve control arm allows for adjusting the spring tension for optimal performance.

SAFETY BUILT IN

  • Fully equipped with CSA/UL approved regulator to provide precise control over fuel flow to the kettle.
  • Features a heavy-duty ratchet strap to secure the propane tank.
  • Kettle is equipped with a latch which help keep your lid securely fastened while moving from job to job.

 

  • 142lbs/65kgs Assembled
  • Powder Coated Steel Frame
  • Standard Agitation
  • 150,000 BTU Heating Torch
  • 12.5 Gallons
  • 30PSI Max Fuel Pressure
  • Up to 3,200 Feet Per Day
<iframe width="560" height="315" src="https://www.youtube.com/embed/ywGjWBXPQoI" frameborder="0" allow="accelerometer; autoplay; encrypted-media; gyroscope; picture-in-picture" allowfullscreen></iframe>