Asphalt

4 products

4 products

Quick view
RY10MK-PRO Crack Fill Melter Kettle (V3)
$1,349.00
Quick view
RY10MS Mastic Applicator (V1)
$2,399.00
Quick view
RY30MK-PRO Crack Fill Melter Kettle (V2)
from $1,999.00
Quick view
RY10MA-PRO Crack Fill Melter Applicator (V4)
$1,799.00

RY10MK-PRO Crack Fill Melter Kettle (V3)

$1,349.00 Save $-1,349.00
/

The RY10 MK-PRO is a portable crack fill kettle designed to be free standing or optionally bolted to any truck or trailer. Its heavy duty molasses valve allows you to control the flow of material into any pour-pot or bander. Safety, reliability and efficiency combine in this machine to create a contractor’s must-have. What’s more, the advanced kettle design distributes heat more quickly, reducing melting time by almost 35%. The CSA / UL approved Regulator, Fuel Lines and Flame-out sensor mean you have safe and precise control over fuel going to the burner. Contractors can expect to apply up to 600′ of crack filler per hour or 4,800 feet per day using crack banders or pour pots in combination with this progressive new kettle / burner combination.

  • 10 Gallon Direct-Fired Melter Kettle with Single-Burner

SAFETY BUILT IN

  • Fuel Regulator - Fully Equipped with CSA / UL approved Regulator and Fuel Lines provide precise control over fuel flow and kettle temperature.

  • Flame-Out Sensor - The unique sealed burner is equipped with a CSA / UL approved flameout sensor which detects flameouts commonly caused by wind and prevents fuel from flowing to the burner.

EASY TO OPERATE

  • Push Button Operation - No more wasting time searching for a striker, lighter or matches. Starting a melter has never been easier with our Push Button Electric Ignition.

RELIABLE

  • Sealed Burner Design - The sealed gas burner is shielded from the elements and virtually eliminates flameouts by wind, which are common to torch-fired models.

  • Glycerin Filled Thermometer - The temperature gauge is one of the most vulnerable parts on any crack fill melter. The RY10MK-PRO features a solid steel protective bracket over the gauge to protect it from accidental damage in transit. The thermometer itself is glycerin-filled to reduce vibrational damage and to provide an accurate reading even in motion.

PRODUCTIVE

  • 50% Faster! - Melts crack sealant up to 50% faster than torch-fired models and allows you to melt enough filler to apply up-to 4,800ft of crack filler per day.
  • 50% Less Fuel! - The optimized burner/kettle design provides even heat distribution during the melting process; this eliminates downtime caused by material crystallization common to torch fired models. The sealed burner consumes nearly 50% less fuel than traditional torch-fired melter applicators.
  • 120lbs/55kgs Packaged
  • 115lbs/52kgs Assembled
  • Powder Coated Steel Frame
  • Standard Agitation
  • Sealed Burner
  • 60,000 BTU
  • .5PSI Max Fuel Pressure

RY10MS Mastic Applicator (V1)

$2,399.00 Save $-2,399.00
/

The RY10MS was designed to load, dispense and maintain  hot material directly from skid mounted or trailer mastic kettles.

A slanted, ultra-low-profile design allows you to confidently load mastic material from either the front or right side of the kettle.

Material flow is carefully controlled through a large, rectangular gate valve which places hot material near the centre of an easy-to-swap ultra-heavy duty 8″ square steel shoe.

  • 10 Gallon Direct-Fired Mastic Applicator with Standard Torch

SAFETY BUILT IN

  • Handle mounted controls keep the further from the got kettle during operation.
  • A slanted kettle promotes loading from the front of the machine, promoting safer loading and assisting material flow.

EASY TO OPERATE

  • The on-the-fly valve control paired with the easy-swappable steel shoe enables effortless dispensing and optional spreading of material.
  • Handlebar mounted shoe control allows you to lower the shoe during application or keep it raised during transportation.

RELIABLE

  • Large solid-steel wheels equipped with ball-bearings along with dual heavy-duty front castors make maneuvering and fillingseams, cracks, or potholes a breeze.
  • A rigid 14 gauge powder coated kettle easily keeps material at the application temperature, regardless of climate.

PRODUCTIVE

  • Load, transport and apply thousands of pounds of mastic material per day into all types of cracks, seams, joints, or potholes.
  • Maintain and clean gate valve and chute with an included, handlebar mounted clean-out tool.
Fluid Capacity 10 US Gallons
Kettle Steel Thickness 14 Gauge
Kettle Loading Height 17.5″
Empty Weight 139 lbs / 63.2 kg
Max Capacity Weight 237 lbs / 107.7 kg
Fuel Type Propane
Max Fuel Pressure 30 psi
Burner Type 150,000 BTU/hr Heating Torch
Valve Type 5-1/2″ x 2-1/2″ Gate Valve
Agitation Type Manual

RY30MK-PRO Crack Fill Melter Kettle (V2)

$1,999.00 Save $-1,999.00
/

The RY30MK-PRO is the worlds first 30-Gallon direct fired crack fill melter kettle featuring dual internal burners. This kettle is designed to be free standing, or optionally bolted to any truck, or trailer. Its heavy-duty molasses valve allows you to control the flow of material into any pour-pot, or bander. Safety, reliability and efficiency combine in this machine to create a contractor’s must-have.

  • 30 Gallon Direct-Fired Melter Kettle with Dual-Burner

SAFETY BUILT IN

Fuel Regulator - Both burners are fully Equipped with CSA / UL approved Regulator and Fuel Lines provide precise control over fuel flow and kettle temperature.

Flame-Out Sensor - The unique sealed burners are equipped with a CSA / UL approved flameout sensor which detects flameouts and shuts off the flow of fuel to the burner.

EASY TO OPERATE

Push Button Operation - The push-button electric ignition switch means no more fumbling for lighters, strikers or matches.

RELIABLE

Sealed Burner Design - The patented sealed gas burner is shielded from the elements and virtually eliminates flameouts by wind, which are common to torch-fired models.

Glycerin Filled Thermometer - The temperature gauge is one of the most vulnerable parts on any crack fill melter. The RY10MK-PRO features a solid steel protective bracket over the gauge to protect it from accidental damage in transit. The thermometer itself is glycerin-filled to reduce vibrational damage and to provide an accurate reading even in motion.

PRODUCTIVE

9600 Feet Per Day - Melt crack sealant with ultimate reliability. The RynoWorx RY30MK-Pro melts enough sealant to fill up to 9600 feet of cracks per day.


120,000 BTUs - The patented dual internal burners provide ultimate control over melting crack filler. Whether you’re looking for a blazing fast pre-heat or simply keeping material warm while active on the job site, the RY30MK-Pro is a must-have for maintenance professionals.

RY10MA-PRO Crack Fill Melter Applicator (V4)

$1,799.00 Save $-1,799.00
/

The RY10MA-PRO Professional Crack Fill Melter Applicator’s patent-pending design uses up to 50% less fuel than traditional melter applicators – and it’s got built in time-saving innovations, too.

  • 10 Gallon Direct-Fired Melter
  • Applicator with Single-Burner

 

PRODUCTIVE

  • Melts crack sealant up to 50% faster than torch-fired models and allows you to apply up-to 4,800 feet of crack filler per day.
  • The patented sealed burner consumes nearly 50% less fuel than traditional torch-fired melter applicators.

RELIABLE

  • The enclosed burner design is shielded from the elements and virtually eliminates flameouts caused by wind, which are common to torch-fired models.
  • High-quality glycerine-filled thermometer provides precise temperature readings and is resistant to premature failure caused by constant vibration while in use.
  • Two solid front casters allow the operator to maneuver over slanted surfaces with increased stability.

EASY TO OPERATE

  • No more wasting time searching for a striker, lighter, or matches. Starting a melter has never been easier with our push button electric ignition.
  • Side-by-side controls, including standard on-the-fly agitation allow the operator to control agitation, flow, and application of material as well as view and adjust temperature, all without leaving the operating position.
  • The built-in drip stop allows you to move between cracks without making a mess.

SAFETY BUILT IN

  • Fully equipped with CSA/UL approved regulator and fuel lines provide precise control over fuel flow and kettle temperature.
  • The sealed burner is equipped with a CSA/UL approved flameout sensor which detects flameouts and prevent fuel from flowing to the burner.
  • Heat shields protect the fuel lines and cylinder from the radiant heat of the kettle.
  • 159lbs/72kgs Assembled
  • Height Adjustable Controls
  • Powder Coated Steel Frame
  • Double Front Casters
  • On-The-Fly Agitation
  • 50,000 BTU Sealed Burner
  • 12.5 Gallons
  • 5PSI Max Fuel Pressure
  • Up to 4,800 Feet Per Day
<iframe width="560" height="315" src="https://www.youtube.com/embed/6rbjpaR7svg" frameborder="0" allow="accelerometer; autoplay; encrypted-media; gyroscope; picture-in-picture" allowfullscreen></iframe>